Toshiba 2032SP - Manual (Page 35)

Talking on the Device
Here explains how to use your device when you talk on the phone. Keep the
device from your face more than 1 inch (2.5 cm).
Using the Microphone and Speaker:
Using the Phone Headset:
To use the supplied Phone Headset, insert it into the headset jack.
For the Phone Headset, see page 20.
Using the Remote Control Unit:
To use the Remote Control Unit, insert it into the headset jack and insert
the headphones (sold separately) into the stereo headphones jack of the
Remote Control Unit.
For the Remote Control Unit, see page 21.
To use the / button of the Remote Control Unit, press and
immediately release for and press and hold for .
Section 2: Understanding Your Device
2B: Phone Function - The Basics 61
Section 2: Understanding Your Device
60 2B: Phone Function - The Basics
Displaying Your Phone Number
Just in case you forget your phone number, your PCS Device can
remind you.
To display your phone number:
1. Tap Admin .
2. Tap About .
Making and Answering Calls
Making Calls
Your PCS Device offers many different ways to make calls, including
PCS Voice Command
SM (page 163), using Contacts (page 90), Speed
Dialing (page 94) and using Call History (page 82).
To make a call using your keypad:
1. Turn the Radio Standby Switch (located on the left side) ON. The phone
function will automatically launch and the phone function can be
used when the main screen appears.
2. On the VOICE tab screen, enter a phone number. (If you make a
mistake while dialing, tap to erase one digit at a time. Tap
to erase the entire number. Tapping and holding also erases the
entire number.)
3. Tap .
4. When you’re finished, Tap .
Tip: To redial your last outgoing call, tap on the VOICE tab screen .
The redial function does not work when there has been a missed call.
Tip: When making calls off the enhanced Sprint Nationwide PCS
Network, always dial using 11 digits (1 + area code + phone number).
BACK
BACK
SPRINT2B.QXD 02.8.6 6:43 PM Page 60