Tripp Lite PDUMH15ATNET - Manual (Page 7)

7
Installation
continued
Networking the PDU
continued
Testing Network Connection
6-1 Access PDU with Web Browser: After an
IP address has been assigned to the PDU,
attempt to access it with a Web browser that
supports frames, forms and Java
™ . Open a Web
browser on a computer connected to the LAN
and enter the IP address assigned to the PDU.
You should be prompted for a password . The
user name is admin and the default password is
admin. After you enter the user name and
password, the PowerAlert Status page will
appear in the browser window. For more
information about configuration and operation of
the PDU via the PowerAlert interface, refer to
the SNMPWEBCARD User's Guide, included
on the CD-ROM bundled with the PDU.
Note for Network Management System Users Only: Two MIB
files - Tripplite.mib and RFC1628.mib - must be loaded on each
Network Management Station that will monitor the PDU via
SNMP. The files are provided on the CD-ROM included in the
product package.
B
A
A
B
200706234 93-2701 PDUMH15-20ATNET OM.qxd 7/11/2007 4:51 PM Page 7