TRENDnet TVP-224HR - Manual (Page 122)

TVP-224HR User’s Guide
122
Appendix F - Worksheets
IP Parameters
Consult your network manager to obtain a static IP address for the TVP-224HR,
and the information about the IP subnet mask and the default gateway for your
network. Fill out the following work sheet before configuring the TVP-224HR.
IP address
IP subnet mask
Default gateway
ATPM Destination Table
Local Destinations
Each telephony port of the TVP-224HR must be assigned a unique destination ID.
Fill out the worksheet for local destinations by designating each port a unique
destination ID, then use the CLI command
atpm dadd dest_id port
port# for each entry in the worksheet to add it to the destination table. The
dest_id in the command corresponds to the Destination ID in the worksheet, while
the port# corresponds to the Port#. You may alternatively use the web browser to
add local destinations to the destination table.
Port# Mode Destination ID
0 port
1 port
2 port
3 port