TRENDnet TVP-224HR - Manual (Page 54)

TVP-224HR User’s Guide
Domain Name, rather than an IP address.
|Trusted Telnet
Clients
This allows you to restrict remote access by IP address. To enable,
enter the IP address of the trusted client.
Ping Reply
If enabled, this service allows the TVP-224HR to reply when
pinged.
To connect from a remote PC via the Internet
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTPS://" followed by the Internet IP Address of the TVP-
224HR. If the port number is not 80, the port number is also required. (After the IP
Address, enter ":" followed by the port number.)
e.g.
HTTPS://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
Upgrade Firmware
Use this screen to upgrade your TVP-224HR's firmware.
• You must download the required firmware file, and store it on a TFTP Server.
• During the upgrade process, all existing Internet connections will be terminated.
• The upgrade process must NOT be interrupted!.
Figure 28: Upgrade Firmware Screen
Data – Upgrade Firmware Screen
Upgrade Firmware
Upgrade File
Click the "Browse" button and browse to the location on your TFTP
Server where you stored the firmware upgrade file. Select this file.
TFTP Server IP
Enter the IP address of the TFTP Server.
54