TRENDnet TVP-224HR - Manual (Page 99)

TVP-224HR User’s Guide
Dial Plan Settings / Dialplan Table Setup atpm req
8. Select “Add” and “Telephone
atpm aadd 11 2 5 11 2
9. Enter following fields
a. Telephone Number: 11
b. Hunt Group ID: 11
c. Min. Digits: 2
d. Max. Digits: 5
e. Strip Length: 2
f. Append Prefix: none
10. Click on “OK”
Dial Plan Settings / Dialplan Table Setup
11. Select “Add” and “HuntGroup”
atpm hadd 11 2 11
12. Enter following fields
a. Hunt Group ID: 11
b. Destination ID: 11
13. Click on “OK”
Dial Plan Settings / Dialplan Table Setup
14. Select “Add” and “DestinationID” atpm dadd 11 dns tvp1.dyndns.org
15. Enter the following fields
c. Destination ID: 11
d. Hostname (or IP address)
tvp1.dyndns.org
e. Click on “Ok”
atpm done
Dial Plan Settings / Store Dial Plan
atpm store 16. Click on “Store”
99
Changes to network settings require rebooting to take effect.
Changes to the Dial Plan do not and will take effect as soon
as they are stored.
Caution: If you do not store the dial plan, it will be lost
when you reboot.
Note: After changing the default IP address, you will be
required to use the new IP Address (hostname), in this
example tvp2.dyndns.org, to gain access to the TVP-224HR
via web browser user interface or Telnet.