Cocoon 350 – Topcom Cocoon 350 User Manual

Page 21

Advertising
background image

22

• Dial the number of the handset you want to remove (1 –5). Use the number keypad.
• Press the Programming key

.

• ‘REMOVE HS’ appears on the display and the handset is removed
• NOT SUB’ appears on the handset removed.

4.27 Selecting a base unit

If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit
because the handset can only communicate with one base unit at a time. There are two possibilities:

4.27.1 Automatic selection

If you set the handset to ‘automatic selection’, the handset will automatically choose the closest
base unit in standby.
• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘SETTING’ appears on the display.

• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘BASE SEL’ appears on the display.

• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘AUTO’ appears on the display.

• Press the Programming key

.

• ‘SEARCHING’ and the symbol

appear on the display.

• A signal sounds once the handset has found a base unit.

4.27.2 Manual selection

If you set the handset to ‘manual selection’, the handset will only choose the base unit you
have set.
• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘SETTING’ appears on the display.

• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘BASE SEL’ appears on the display.

• Press the Programming key

.

• Press the Up or Down key

repeatedly until ‘MANUAL’ appears on the display.

• Press the Programming key

.

• ‘BASE -‘ appears on the display.
• Enter the number of the base unit you want to select (1-4). Use the number keypad.
• Press the Programming key

.

• ‘SEARCHING’ and the symbol

appear on the display.

• A signal sounds once the selected base unit has been found.

Notes :

Before you can select a base unit, the base unit must be subscribed to the handset first.

If ‘NOT SUB’ appears on the display, this means the selected base unit does not exist or the handset
has not been subscribed.

Cocoon 350

22

22

22

22

22

22

22

22

22

22

COCOON 350 GB_P_GR 8/8/01 8:52 am Page 22

Advertising