Cocoon 350 – Topcom Cocoon 350 User Manual
Page 30
31
• When you use the machine for the first time and have not yet set the day/time, no day/time registration
of incoming messages is recorded.
• If there is a loss of power to the base, the day/time must be reset.
7.10 Checking Day/Time
• Press the Programming Key
twice to go to the answering machine menu (see
'Answering Machine Menu').
• Press the
key to display the day/time. The internal voice will say the current day/time
setting.
7.11 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see Remote Operation).
The VIP code is set to '321' by default.
Note: If there is a loss of power to the base, the VIP code will revert to '321'.
7.11.1 Changing the VIP Code
• Press the Programming Key
twice to go to the answering machine menu (see
'Answering Machine Menu').
• Press the '0' key.
• Press the
- key to confirm the VIP code.
• The internal voice asks you to set the VIP code and says the first number.
• Press a few times on
or
keys to set the first number of the VIP code.
• Press the de
key to confirm the first number. The internal voice says the current set
2nd digit of the VIP code.
• Press a few times on
or
keys to set the second digit of the VIP code.
• Press the key
to confirm the second number. The internal voice says the current set
3rd digit of the VIP code.
• Press a few times on
or
keys to set the third digit of the VIP code.
• Press the de
key to confirm the VIP code. You will hear a long beep. The internal
voice says the new VIP code for confirmation.
Note: If you do not press any keys for 8 seconds, the previous VIP code is saved and the machine automati-
cally exits the VIP setting mode.
7.11.2 Checking the VIP Code
• Press the Programming Key
twice to go to the answering machine menu (see
'Answering Machine Menu').
• Press the
key to play the VIP code. The internal voice says the current VIP code.
7.12 Operation
If a call is received and the answering machine is turned on (
symbol on the display), the
answering machine will automatically pick up the line after the set number of rings. If
• outgoing message 1 has been selected, it will be played. After the outgoing message, a beep
will be heard and the caller can leave a message (of a max. 3 minutes).
Cocoon 350
COCOON 350 GB_P_GR 8/8/01 8:52 am Page 31