Explanation rear panel – Toshiba CGSV90CC3 User Manual
Page 11
D4153660A
3
5. Explanation rear panel
(1)
Ethernet
Gigabit
Ethernet
Interface
connector
- Connector model
P65-P01-19V8 (Supplied by SpeedTech Corp.)
- Pin assignment
Pin No.
I/O
Function
1 I/O
BI_DA+
2 I/O
BI_DA-
3 I/O
BI_DB+
4 I/O
BI_DC+
5 I/O
BI_DC-
6 I/O
BI_DB-
7 I/O
BI_DD+
8 I/O
BI_DD-
- Indication LED1: GREEN (ACT LED)
LED1 indicates the state of ACT.
During
transfer:
Lighting
- Indication LED2: YELLOW (LINK LED)
LED2 indicates the state of LINK.
During
Link:
Lighting
* LINK LED indicates establishment of Link of 1000BASE. Therefore, in the case of 100BASE/10BASE,
LINK LED does not light.
(2) DC_IN / TRIGGER
- Connector (Camera side)
HR10A-7R-6PB(73)
(Supplied by HIROSE ELECTRIC CO., LTD.)
- Plug (Cable side)
HR10A-7P-6S(73)
(Supplied by HIROSE ELECTRIC CO., LTD.)
or
equivalents
* This camera cable is not an accessory of this product.
- Pin assignment
Pin No.
Signal Name
[Standard specification]
1 BUSY_OUT
2 GND
3 GND
4 TRIG_IN
5 EXPOSE_OUT
6 +12V
(2)
(1)
Rear View
LED1
LED2
* Above figure is connector view from insert side.
1
6
2
3
4
5