Toshiba CGSV90CC3 - Manual (Page 32)

D4153497A
Notes on using this product
! ! ! ! Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause
malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.
!
! ! ! Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In particular,
do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high
temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or camera
conditions (such as increased gain). However, such phenomena are not malfunctions.
! ! ! ! Regarding a lens mount
Depending on the lens you use, the performance of the camera may not be brought out fully due to the
deterioration in resolution and brightness in the peripheral area, occurrence of a ghost, aberration and
others. When you check the combination between the lens and camera, be sure to use the lens you actually
use.
As for the C-mount lens used combining this camera, the projection distance from bottom of the screw
should use 9.4mm or less.
! ! ! ! Check a combination with the lens
Depending on the lens and lighting you use, an image is reflected as a ghost in the imaging area. However,
this is not because of a fault of the camera.
In addition, depending on the lens you use, the performance of the camera may not be brought out fully due
to deterioration in resolution and brightness in the peripheral area, aberration and others.
Be sure to check a combination with the camera by using the lens and lightning you actually use.
When installing a lens in the camera, make sure carefully that it is not tilted.
In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be
removed.
! ! ! ! Do not shoot under intense light
Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If
intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.
! ! ! ! Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.
! ! ! ! Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may
be generated on the screen. If this occurs, move the camera or the cable.
! ! ! ! Handling of the protective cap
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.
9.4mm or less
C-mount lens
Bottom of
the screw