TC electronic SDN BHD x32 - Manual (Page 22)

SETUP EXAMPLES
20
Example 2: Conventional audio interface
PREAMP #2
PREAMP #1
CD/DVD PLAYER
COMPUTER
AIR SPEAKERS
FORMAT CONVERTER | PATCHBAY | FIREWIRE IO digitalkonnekt x32
3-4 3-4 3-4 1-2 1-2 1-2 5-6 5-6 5-6 7-8 7-8 7-8 adat adat adat mon mon mon setup/util scenes aes/spdif/tos in adat in firewire in master clock aes+spdif+tos aes+spdif+tos aes+spdif+tos SRC SPDIF TOS NS 1-8 44.1k clock rate
aes
/spdif monitor LEDs
dual wire XLR
hold to select input security lock device
adat
monitor +phones
WCK in
firewire
INT
48k x2
x4
TOS IN 5/6
FRONT
aes/spdif clock master
DS 9-16
LOCK SIG LOCK SIG LOCK SIG
SEL
1/2 1/2 1/2
3/4 3/4 3/4
5/6 5/6 5/6
7/8 7/8 7/8 SRC
HOLD TO STORE SCENE
input signal
HOLD TO UN-LOCK
192kHz fs
AES pro out
1
2
3
4
1-2 1-2 1-2
3-4 3-4 3-4
5-6 5-6 5-6
7-8 7-8 7-8 adat 1-8 adat 1-8 adat 1-8 P
KEYBOARD
TOSLINK
3/4
SPDIF
5/6 SPDIF
7/8
FIREWIRE
AES 1/2
CAT 5
SPDIF
1/2
In this example we show how to use the Digital Konnekt
x32 as a conventional audio interface with four different
external digital sources are connected. For monitoring we
have connected a couple of active monitors equipped
with AES/EBU input.
Connections
•
A keyboard or another digital instrument with SPDIF
out is connected to SPDIF 1/2 inputs on Digital
Konnekt x32 using a coax cable.
• A CD player with Toslink output is connected to TOS
3/4 inputs on Digital Konnekt x32 using a lightpipe
cable.
• Two preamps with SPDIF outputs are connected to
the SPDIF inputs 5/6 and 7/8 on Digital Konnekt x32
using coax cable.
• Digital Konnekt x32 is connected to the computer via
firewire.
• The master Air monitor is fed from Digital Konnekt
x32’s AES 1/2 outputs. The Air slave monitor is
connected to the Air master monitor via a standard
CAT-5 cable.