TC electronic SDN BHD x32 - Manual (Page 23)

Setting up Digital Konnekt x32
AES/SPDIF/TOS in
• SPDIF is selected for channel pair 1/2.
(keyboard)
• TOS is selected for channel pair 3/4
(CD player)
• SPDIF is selected for channel pairs 5/6 and 7/8
(preamp #1 and preamp #2)
• As none of the attached devices can sync to an
external clock we activate SRC (Sample Rate
Conversion) for all channel pairs.
Master Clock
•
We want Digital Konnekt x32 to act as master clock
and master clock is therefore set to Internal.
• The actual clock-rate is set on your DAW
master clock
44.1k
clock rate
aes
/spdif
hold to select input
adat
WCK in
firewire
INT
48k
x2
x4
SEL
3-4 1-2 5-6 7-8
aes/spdif/tos in aes+spdif+tos
SRC SPDIF TOS
FRONT
aes/spdif clock master LOCK
SIG
1/2
3/4
5/6
7/8
Firewire
•
Because the AIR speakers in this example are
attached to AES outputs 1+2, we want to monitor the
DAW using AES output channels 1/2.
• Via your host program you must send your main
outputs Digital Konnekt x32, select AES 1/2 on the
front panel and activate AES 1/2 in the Firewire
monitor section.
3-4 1-2 5-6 7-8
adat mon firewire in aes+spdif+tos
1-8
9-16
LOCK
SIG
1/2
3/4
5/6
7/8
1-2
3-4
5-6
7-8
adat
1-8
SETUP EXAMPLES
21