Toshiba PSA20 - Manual (Page 150)

User's Manual
8-14
O
PTIONAL
D
EVICES
TV
You can connect a television set to the TV out port on the computer. Follow the
steps below.
Connecting a TV
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the TV adaptor cable’s mini-jack
to the TV out port on the computer.
3. Connect the TV adaptor cable’s RCA jack to the RCA jack on the TV.
4. Turn the television on.
5. Turn the computer on.
You can use the hotkeys Fn + F5 to change the display device. Refer to Chapter 5,
The Keyboard .
NOTE: If a television is connected to the computer, set the TV type in
Display Properties. Follow the steps below.
a. Click start and click Control Panel .
b. Double-click the Display icon to open the Display Properties
window.
c. Click the Settings tab and click the Advanced button.
d. Click the nView Display Mode tab, click Device Settings and
click Select Output Device .
e. Select Advanced and select TV in the Device Selection
window.
f. Select the Format box and select the format that your TV supports.
Changing the resolution
After you connect a TV (NTSC), follow the steps below to set the Display resolu-
tion to 640 x 480.
1. Open Display properties and select the Settings tab.