Thomas & Betts 9395 - Manual (Page 48)

UPS 225 - 275 kVA
User’s and Installation Guide
1027212
Revision B
4
5.1 UPS controls and indicators
The controls and indicators identified and described in this section are used to control and
monitor UPS operation. Figure 6-1 shows the UPS controls and indicators.
Figure 5-1. Powerware 9395 225–275 kVA UPS controls and indicators
5.1.1 Control panel
The Control Panel is used to set up and control the UPS, and to monitor UPS operation. For a
description of the UPS control panel functions, see paragraph 5.2.
5.1.2 Circuit breakers
Circuit breaker (CB1) is used to control the AC input to the UPS rectifier.