Toshiba Strata DK - Manual (Page 16)

The Grand Tour
Electronic Telephone Diagram
4
Strata DK Electronic Telephone 5/00
+2/' (continued)
If the held party hangs up, the call is released and the
&2
provides a
hold-release signal.
Note If your telephone is programmed for Automatic Hold, existing calls
are automatically placed on hold when you answer a call or make
another call. (See
“Automatic Hold” on Page 24 .)
A different call can be held on each [DN] or
&2 button on your phone. Each time you
press
6&5/
, a different [DN] or
&2
is
selected. The selected button’s LED flashes
rapidly and your LCD displays information for
the call holding on that button (samples shown
at right).
0,&
(Microphone)
➤ Press to toggle the microphone ON/OFF while the telephone is in use.
The LED indicates the status of the microphone.
Notes
●
The microphone and accompanying LED are always ON when
receiving “voice first” internal [DN] calls to enable Handsfree
Answerback and OFF if you receive a ring-first call.
0,& may be ON/
OFF when placing an on-hook CO Line or internal [DN] call.
●
Each station’s 0,& can be set in system programming to switch ON/
OFF with one touch, to switch OFF only while pressed and held, or to
be either ON/OFF at the start of handsfree dialing.
●
0,& functions on Handsfree Answerback and OCA calls for privacy.
63.5
(Speaker)
➤ Press to toggle the speaker ON/OFF. The LED indicates the status of
the speaker. Also selects a line or the internal [PDN] if programmed for
auto preference in system programming. Can be used to disconnect
on-hook speakerphone calls.
92/ ➤ Slide to adjust volume levels (see “Volume Controls” on Page 11 ) .
5,1*
➤ Slide to adjust the ring volume levels, and the voice levels of the caller
(Handsfree Answerback operation).
Table 1 Fixed Button Instructions (continued)
Button Instructions
CO LINE 02
HOLD
DN 202
HOLD