Toshiba Strata DK - Manual (Page 43)

Features
Call Forwarding
Strata DK Electronic Telephone 5/00
31
➤ To cancel a Call Forward–External
➤ Press &)²(;7
...or [PDN] +  + 63.5 .
Call Forward Remote Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
When forwarding to an outside destination include the CO line (or CO line
group) access code before the telephone number,
See Table 11 on Page 108 for CO Line/Line Group access codes. The LCR
access code “9” cannot be used.
2. Press &)(;7
...or the [PDN]/
[PhDN] +
 .
Incoming calls forward to the destination stored at
Station Speed Dial Location 49.
1. Call into the DK
system over a CO
Line programmed for
the DISA feature.
You hear ringback tone signal, then internal dial tone
for 10 seconds.
Try again if you hear busy tone.
Note See the System Administrator for DISA
telephone numbers.
2. Press

then dial
your [PDN] after you
receive dial tone.
You hear a confirmation tone.
If a number is not dialed, the system automatically
makes the DISA CO Line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
3. Enter the Remote
Call Forward-
External security
code.
You hear a confirmation tone. See the System
Administrator for the security code which is assigned
to your telephone in system programming.