Dtmf tone dialing with * and, Dtmf tone dialing with – Toshiba Strata DK User Manual
Page 57
Features
DTMF Tone Dialing with
and #
Strata DK Electronic Telephone 5/00
45
➤
To call/monitor a door phone
DTMF Tone Dialing with
and #
You may have to send
and DTMF tones to some devices or services, such as a
voice mail device or computer output service. DTMF tones are automatically enabled
on stations with
5'/
and
6'6
. If you do not have
6'6
and
5'/
, you must first dial
, to enable these tones.
This feature disables the Speed Dial feature during the call. Speed Dial is restored
when you complete the call or place it on hold.
➤
To output
and DTMF tones on a telephone without a SDS/RDL button
1. With the handset
off-hook, press a
[DN].
You hear dial tone and the LED flashes (in-use).
2. Dial the [DN] for the
desired door location.
A two-way talk-path exists between your telephone
and the called door phone. You can audibly monitor
the area around the door phone.
Note
Door phone [DNs] can be stored on
6'
buttons. See
“Speed Dial–Advanced Features”
➤
Press
, then
You can now output
and , DTMF tones, and digits
~
for the duration of the outside call. This
procedure must be repeated on each call when you
require such output.