Toshiba P200 Series - Manual (Page 131)

User’s Manual 9-10
Optional Devices
When you turn on the power, the computer automatically recognizes the
monitor.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 6, The Keyboard , for details
on using hot keys to change the display settings.
Television
A television can be connected to the video out port on the computer.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 6, The Keyboard .
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
For ATI Mobility Radeon™ HD2400/HD2600*
1. Click Start  Control Panel  Personalization.
2. Choose Display Settings to change resolution and colors.
3. Click Start and All Programs.
4. Click Catalyst Control Center