Continued), Chapter 6: setting up your tv – Toshiba 51H93 User Manual

Page 43

Advertising
background image

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

43

Chapter 6: Setting up your TV

Manually adding and deleting channels
in the channel memory

After you have programmed the channels automatically, you can
manually add or delete individual channels in the channel
memory.

To add or delete channels in the channel memory:

1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set

of INSTALLATION menu icons will appear on-screen, as
shown in step 3).

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold

• • • • • • •

Off

Slide Show Interval

• • •

2 Sec

Convergence

3. Open the TERRESTRIAL menu, highlight CHANNEL

ADD/DELETE, and then press ENTER.

Terrestrial

Input Configuration

Channel Program

Channel Add/Delete

Signal Meter

4. The illustration below shows channels programmed for the

ANT 1 antenna input. To view the list of channels
programmed for the ANT 2 antenna input, highlight
CHANGE ANTENNA and press ENTER.

Channel Add/Delete

Change Antenna

Channel

Signal

Antenna

2

Analog

1

3

Analog

1

4

Analog

1

5

Analog

1

5-1

Analog

1

5-2

Digital

1

5-3

Digital

1

5-4

Digital

1

Clear All

Save

Cancel

Programming channels into the TV’s channel memory

(continued)

To add a channel to the channel memory:

Highlight the unchecked box next to the channel number
you want to add, and then press ENTER to check the box.

To remove a channel from the channel memory:

Highlight the checked box next to the channel number you
want to remove, and then press ENTER to uncheck the
box.

To save your new settings:

Highlight SAVE and press ENTER.

To revert to your original settings:

Highlight CANCEL and press ENTER before saving.

To remove all channels from the channel memory:

Highlight CLEAR ALL and press ENTER, and then
highlight SAVE and press ENTER.

Note: This action cannot be cancelled unless you highlight
CANCEL and press ENTER before saving your changes.

Channel Add/Delete

Change Antenna

Channel

Signal

Antenna

2

Analog

2

3

Analog

2

4

Analog

2

5

Analog

2

6

Analog

2

6-1

Digital

2

6-2

Digital

2

7

Analog

2

Clear All

Save

Cancel

Advertising