GIGABYTE GA-MA790XT-UD4P - Manual (Page 78)

GA-MA790XT-UD4P Motherboard - 78 -
Delete an Array
The Delete Array menu option allows for deletion of disk array assignments.
1. To delete an array, press <3> in the Main Menu to enter the Delete LD Menu. Then highlight the
array you wish to delete and press the <Delete> key or the <Alt>+<D> keys.
2. The View LD Definition Menu will appear (as shown in Figure 9) showing which drives are
assigned to this array. Press <Ctrl>+<Y> if you are sure to delete the array or other keys to abort.
3. When the array is deleted, the screen will return to Delete LD Menu. Press <Esc>to return to
Main Menu.
Deleting an existing disk array could result in loss of data. Record all array information including
the array type, the disk members, and stripe block size in case you wish to undo a deletion.
Figure 9
FastBuild (tm) Utility (c) 2008 Advanced Micro Devices, Inc.
[ View LD Definition Menu ]
LD No RAID Mode Total Drv Capacity (GB) Status
LD 1 RAID 0 2 157.99 Functional
Stripe Block: 64KB Cache Mode: WriteThru
[ Drives Assignments ]
Channel:ID Drive Model Capabilities Capacity (GB)
1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89
2:Mas WDC WD800JD-22LSA0 SATA 3G 80.02
Press Ctrl-Y to delete the data in the disk!
or press any other key to abort...