GIGABYTE GA-MA790XT-UD4P - Manual (Page 94)

GA-MA790XT-UD4P Motherboard - 94 -
Rebuilding in the operating system
Make sure the GIGABYTE SATA2 SATA controller driver has been installed from the motherboard driver
disk. Launch the GIGABYTE RAID CONFIGURER from All Programs in the Start menu.
Step 1:
In the GIGABYTE RAID CONFIGURER screen,
right-click on the array to be rebuilt in the RAID
LIST block. Select Rebuild Raid. (Or click the
Rebuild icon
in the tool bar.
Step 2:
When the Rebuilding RAID Wizard appears, click
Next.
Step 3:
Select a drive to rebuild the array and click Next. Step 4:
Click Finish to start the RAID rebuilding process.
Step 5:
The rebuilding progress is displayed at the bot-
tom of the screen.
Step 6:
When finished, restart your system.