TacT Audio S2150 - Manual (Page 10)

CAUTION CAUTION
10 Tact Audio
M/S 2150 Connections
Digital output
The 2150 amplifier has a digital pass through. The digital input signal is passed to the
digital output without processing or volume control. The sampling rate is the native
sampling frequency of the input.
Digital Output
NOTE: that this output is not active when analog input is selected.
RS-232 interface
ports
The M/S 2150 has two RS232 interface ports:
- INPUT
- AUX
Use the “INPUT” port for communication with your Tact master controller or Personal
Computer.
Use the “AUX” port to connect to TacT digital amplifiers.
RS-232 Interface Ports