TacT Audio S2150 - Manual (Page 11)

11 Tact Audio
AC mains input Connect the M/S 2150 to the AC mains wall socket.
CAUTION: Use the supplied IEC mains cable, or a 3-prong grounded cable only.
Digital Output
Speaker output
(normal operation)
The 2150 amplifier has one pair of high quality WBT speaker terminals. These termi-
nals will accept both spade- and banana-plugs. When connecting your speakers,
please make sure that the RED/HOT terminal is connected to your speakers’ POSI-
TIVE terminal and the BLACK/COLD terminal is connected to your speakers’ NEGA-
TIVE terminal.
RIGHT
SPEAKER
LEFT
SPEAKER
+ - + -
The M/S 2150 has a trigger “IN” and “OUT” to provide on and standby control
from a trigger device and to pass the trigger signal to another device. Trigger outputs
Trigger Connectors
M/S 2150 Connections