Toshiba RAS-18LAH-A - Manual (Page 15)

UNIT OPERATION
PROCEDURE
ON/OFF button
Press this button and the unit starts AUTO operation.
MODE button
If the unit is operating in another mode, press the MODE
button to select AUTO.
TEMP. ( ) buttons
Set the desired temperature using the remote control
buttons.
At the start of the AUTO operation, the temperature
is set at 25
°
c and it is functional within the total
temperature range.
FLAP button
Press this button to control the desired air flow direction.
FAN SPEED button
Set the desired fan speed at start up, on AUTO.
ON/OFF button
Press this button again to stop operation.
Automatic operation means that the air conditioner operates automatically by selecting the COOL or HEAT mode and
automatically changes the fan speed according to the indoor condition to keep the room temperature
comfortable.
AUTOMATIC OPERATION
1
2
3
4
5
6
SLEEP
MODE FAN FLAP
CLOCK EVERYDAY HOUR MINUTE
RESERV.
RST TA
TIMER
ON OFF
CANCEL
A
A
TEMP.
ON/OFF
OWNER , S MANUAL - 13
ቢ
ቧ
ባ
ቤ
ቦ
ብ
NOTE
• When the room temperature is between 21
°
c ~ 29
°
c.
- If the room temperature is lower 1
°
c or more than the set temperature : HEAT mode will operate
- If the room temperature is higher1
°
c or more than the set temperature : COOL mode will operate
• When the room temperature is lower than 21
°
c or higher than 29
°
c, the operation mode is restricted regardless of
the set temperature.
- If the room temperature is lower than 21
°
c then only the heating mode is allowed.
- If the room temperature is higher than 29
°
c then only the cooling mode is allowed.
• The Auto operation is not suitable for the application to the computer room or some food/wine stock storage.