Unit operation, Timer operation, On timer procedure on timer button – Toshiba RAS-18LAH-A User Manual

Page 17: Hour, minute buttons, Reserv. button, Mode, fan, flap, and temp. buttons, About on timer

Advertising
background image

UNIT OPERATION

TIMER OPERATION

ON Timer

PROCEDURE

ON TIMER button

Press this button.
On start up, time is set at 6:00 A.M..

HOUR, MINUTE buttons

Press these buttons to set the start-up time
desired while the ON Timer symbol is flashing.

RESERV. button

Press this button when pointing the remote control towards
the receiver of the indoor unit.
• A receiving beep is heard.
• TIMER lamp of the indoor unit illuminates.

MODE, FAN, FLAP, and TEMP. buttons

Set the desired operation mode with these buttons.

About ON Timer

• When the ON Timer is set, the unit monitors the room

temperature for 1hour before the set time to make sure
the room condition is reached by the reserve time.

• The actual on time of the unit is earlier that the reserved

time by 0 to 40 minutes according to the difference
between room temp. and set temp.

1

2

3

4

NOTE

• The current time is not indicated during the reservation of ON/OFF Time.
• When you want to know the current time, press the CLOCK button and you will see the current time for 5 seconds.
• If you reserve the ON Timer during operation, the unit will operate continuously

SLEEP

MODE

FAN

FLAP

CLOCK EVERYDAY HOUR MINUTE

RESERV.

RST

TA

TIMER

ON

OFF

CANCEL

A

A

TEMP.

ON/OFF

OWNER

,

S MANUAL - 15

Advertising
This manual is related to the following products: