Perreaux SM6 MKII User Manual
Page 10
10
Caution!
Input D (HT Loop) fixes the output to 0dB, as it is a home theatre bypass.
Please ensure the level is suitably attenuated by the upstream processor
or receiver before selecting this input.
Note:
The source selector has six positions and supplies the chosen source to
the Pre/Balanced outputs and Tape outputs. If source input E or F is
selected, no signal is supplied to its applicable Tape output to avoid the
potentially damaging feed back loop which can occur if inadvertently
attempting to record and playback the same source simultaneously.
Mute
Pressing the buttons simultaneously will mute the volume, indicated by “M U”
on the display. M ute can be cancelled by pressing the buttons simultaneously
again, or increasing the volume setting. The volume setting can be decreased
whilst the volume remains muted.
Note:
The mute function still operates when source input D (home theatre
bypass) is selected.
Refer to Chapter 5 “Remote Control Functions”, for further details on source
select and mute controls.