Perreaux SM6 MKII - Manual (Page 32)

32
Audio Connections
Audio Inputs
Unbalanced:................................................................... 6 pairs RCA connectors
Balanced: ......................................................................... 1 pair XLR connectors
Audio Outputs
Unbalanced:................................................................ 2 pairs RCA preamp level
.........................................................................................2 pairs RCA line level
Balanced:......................................................................1 pair XLR preamp level
Other Connections
1 x IEC AC mains input receptacle
2 x 3.5mm mono jacks
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the SM6 at time of manufacture)
Dimensions
Width...............................................................................................430mm (16.9”)
Height ................................................................................................106mm (4.2”)
Depth...............................................................................................323mm (12.7”)
Fuse Ratings
M ains input fuse
100 – 125V: .........................................................................2SB slow blow 0.5A
200 – 250V: .........................................................................2SB slow blow 0.5A
(user serviceable)
Internal DC rail fuses ..................................................2 x 2AG normal blow 0.5A
( NOT user serviceable)
Weight
Net:....................................................................................................7.7kg (17.0lb)
Gross:...............................................................................................10.7kg (23.6lb)
Specifications
Explained
Rated Output........................................................................................... 1.5V
RMS
The SM 6 has been designed to drive any amplifier to it’s full potential. Even
with an input level from a source component with a low level output, the SM 6
has enough gain to provide the amplifier with an optimum signal, utilising the
full dynamic range and signal to noise specifications of the amplifier.
Maximum Output ................................................................................... 3.3V
RMS
The maximum output level of the SM 6 has been designed to provide substantial
headroom allowing greater dynamics without clipping, handling any musical
transients with finesse and ease.
Gain Range ................................................................................ -97dB to +18dB
The range in which the SM 6 can alter the volume level. At the minimum setting
‘00’ the volume level is -97dB, at the maximum setting ‘59’ the level is +18dB.
Volume setting ‘47’ is 0dB.