Toshiba MD30H82 - Manual (Page 20)

20
Basic setup
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or to select your desired language,
then press ENTER.
Starting setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
Starting setup
Press or to select “TV” or “CABLE”, then
press ENTER.
Press or to select “START”, then press
ENTER.
If you select “CANCEL” and press
ENTER, the STARTING SETUP
stops and changes to the TV screen.
1
2
3
Now the “CH PROGRAM”starts.
After the starting setup is com
pleted, the TV channel appears on
the screen.
4
Notes:
• The starting setup function will work only when you press
POWER for the first time.
• The process of “CH PROGRAM” may take 15 - 30 minutes
to complete, depending on your regional cable service.
• If you press CANCEL in the process of “CH PROGRAM”,
you can do starting setup function again.
POWER
/
ENTER