Toshiba MD30H82 - Manual (Page 43)

43
TV operation
Press MENU in the TV mode, then press or
to select AUDIO menu.
1
Press RETURN to clear the menu screen.
4
2
Press or to select “DIGITAL OUTPUT”.
Use this feature to select the digital audio output format
when you connect a Dolby Digital decoder or other
digital audio system to the coaxial digital audio output
on the TV.
Selecting the digital output
Press or to select “PCM” or “DOLBY
DIGITAL”.
3
AUDIO
AUDIO LANGUAGE
DIGITAL OUTPUT
RESET
PCM
PCM / DOLBY DIGITAL
:SELECT :ADJUST
RETURN:END
AUDIO
AUDIO LANGUAGE
DIGITAL OUTPUT
RESET
DOLBY DIGITAL
PCM / DOLBY DIGITAL
:SELECT :ADJUST
RETURN:END
Resetting your audio adjustments
Press MENU in the TV mode, and then press
or to select AUDIO menu.
1
Press or to select “RESET”, and then
press .
2
The RESET function returns the audio adjustments to
the following factory settings:
Bass ................. center (25)
Treble ............... center (25)
Balance .............. center (0)
Press RETURN to clear the menu screen. 3
Selecting the digital output /
Resetting your audio adjustments /
Checking the digital signal strength
Checking the digital signal strength
Press MENU in the TV mode, then press or to
select SETUP menu. Press or to select
“SIGNAL METER”, then press .
S I G N A L M E T E R
C H A N N E L ( D I G I TA L ) 1 - 0 0 1
8 0
You can check the strength of the digital signal by
viewing the digital signal meter.
Notes:
• Signal meter feature is not available for analog channels.
• After approximately 4 minutes, SIGNAL METER screen will
return to normal TV-operation automatically.
• When you select a vacant channel, the signal meter may
react.
AUDIO
AUDIO LANGUAGE
DIGITAL OUTPUT
RESET
PCM
:SELECT :ADJUST
RETURN:END
MENU
RETURN
/ / /
AUDIO
BASS
TREBLE
BALANCE
STABLE SOUND
SURROUND
HDMI
25
25
0
OFF
OFF
:SELECT :ADJUST
RETURN:END
OFF
O
HDMI
AUDIO
BASS
TREBLE
BALANCE
STABLE SOUND
SURROUND
HDMI
25
25
0
OFF
OFF
:SELECT :ADJUST
RETURN:END