Toshiba MD30H82 - Manual (Page 23)

23
TV operation
TV operation
Adjust the volume level by pressing VOL + or – .
The volume level will be indicated
on the screen by green bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of green
bars also decreases.
Set the TV/CABLE selection to the appropriate
position
25 .
1
2
3
Press Direct channel selection buttons (0–9)
or CH
or to select the channel.
4
Notes:
• If a channel with no broadcast is selected, the sound will auto-
matically be muted.
• If a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
• Digital cable channels may be represented by channel
numbers that include a “dash” (e.g., 85–002). These digital
channel numbers may not match the numbers in the
channel line-up provided by your cable company. This is not
a malfunction.
To turn on the unit, press POWER.
The Power indicator will light.
• Every time you turn on the TV, the
unit starts from TV mode. When
you use TV/VCR after DVD operation,
press TV/DVD.
TV - VHF/UHF channels
CABLE - Cable TV channels
TO SELECT ANALOG CHANNELS
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:
Press 0 twice, then 1-9 as needed.
Example, to select channel 2, press 0 0 2.
10-99: Press 0, then the remaining 2 digits.
Example, to select channel 12, press 0 1
2.
100-125: Press the 3 digits in order. Example, to
select channel 120, press 1 2 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the “–/DISPLAY”
button, followed by the remaining 3 digits.
Example, to select channel 015-001, press 0 1 5 –
0 0 1.
Cable TV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
TV operation
TV operation
TV/DVD
VOL +/–
POWER
0–9/–
V O L U M E 3 2
A N T T V
7
CH /
5V80101A [E]p22-29 2/22/06, 1:14 PM 23