Topcom BUTLER 5710 - Manual (Page 24)

7
Using the telephone
3.5 Handsfree mode
Handsfree lets you talk to your caller without holding the handset. It also enables other people in
the room to listen to both sides of your conversation.
3.6 Adjust earpiece/handsfree volume
3.7 Secrecy function (Mute function)
To turn off the microphone so the person on the other side of the line will not hear you.
3.8 Locating a handset (Paging function)
3.9 Keypad Lock
To lock the keypad to prevent accidental dialling while carrying the handset around.
In standby:
3.10 Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering a
name into the phonebook, giving a name to the handset, ...
To select a letter, press the corresponding key as many times as necessary.
For example, to select an ‘A’, press ‘2’ once. To select a ‘B’, press ‘2’ twice and so on.
To select ‘A’ and then ‘B’ consecutively, press ‘2’ once, wait until the cursor moves on to the next
character, then press ‘2’ twice.
During entering text, the available character under each key appears below on the display.
1 To switch any call to handsfree, press the handsfree key during the call.
1 Press up or down to select volume 1-5 during a normal or handsfree call.
1 During a conversation, press the soft menu key to deactivate the
microphone.
“Mute On” appears on the display.
2 Select “Off” to activate the microphone again.
1 Press the paging key on the base.
All handsets registered with the base will ring for 30 seconds.
2 Press any key on the handset to stop the paging.
1 Press and hold the keypad locked key (key 7 - Picture 2C) until “Locked”
and the keypad locked icon appears on the display.
2 To unlock, select “Unlock”, followed by the keypad locked key.
4 5 6
g h i j k l m n o