Topcom BUTLER 5710 - Manual (Page 29)

Eng
lish
12
Personalise the handset
6.2 Handset name
You can change the name displayed on the handset during standby (max. 9 characters).
6.3 Keypad beeps
6.4 Setting the contrast
6.5 Autotalk
When there is an incoming call and the handset is on the base, the phone automatically takes the
line when lifted from the base. This function can be turned on or off.
6.6 Prefix code
It is possible to use your telephone with a prefix number. When dialling telephone numbers, you
can add automatically the prefix code before the number.
1 Enter the menu.
2 Select “Handset” and confirm.
3 Select “Handset name” and confirm.
4 Enter the name you want.
5 Press the soft menu key to correct.
6 Select “Save” to confirm.
7 Return to standby.
1 Enter the menu.
2 Select “Handset” and confirm.
3 Select “Keypad beep” and confirm.
4 Select “On” or “Off” and confirm.
5 Return to standby.
1 Enter the menu.
2 Select “Handset” and confirm.
3 Select “Contrast” and confirm.
4 Select the contrast you want (1-8) and confirm.
5 Return to standby.
1 Enter the menu.
2 Select “Handset” and confirm.
3 Select “Autotalk” and confirm.
4 Select “On” or “Off” and confirm.
5 Return to standby.
1 Enter the menu.
2 Select “Handset” and confirm.
3 Select “Prefix” and confirm.
4 Select “Edit” and confirm.
4 5 6
g h i j k l m n o