Ultratec CRYSTALTONE 305-009901 - Manual (Page 10)

8 ■ S AVING PHONE NUMBERS
SAVING PHONE NUMBERS
NOTE: The Speed-Dial numbers are saved
using power that the C r y s t a l To n e r e c e i v e s
from the telephone line. If you disconnect the
C r y s t a l To n e from the wall jack, or if the
telephone company experiences an outage for
an extended period of time , the Speed-Dial
numbers may be erased.
SAVING EMERGENCY NUMBERS
The CrystalTone has three buttons reserved for
emergency numbers:
Police
Hospital
Fire
You choose what number is stored for each
button.
These buttons are NOT
preprogrammed with emergency numbers.
NOTE: The Speed-Dial buttons with these
symbols are provided only as a convenience.
Ultratec assumes no responsibility for
customer reliance upon this memory feature.
Follow the steps under “Saving Speed-Dial
Numbers ” to set emergency numbers, except
that in Step 4, press the Emergency button
instead of the Speed-Dial Directory button.
SAVING SPEED-DIAL NUMBERS
1. Lift the handset.
2. Press the
button.
3. Dial the phone number that you wish to
save just as if you were calling that
number.
4. Press the Speed-Dial Directory button that
you wish to use for this number.
5. Hang up the handset.
6. Remove the clear plastic Directory cover:
Use the point of a pencil or other small
object to lift from the notches located on
each side of the cover.
7. In black ink, write the first name of the
person on the Directory label. There is a
space next to each Speed-Dial button. Print
large, clear letters so you will be able to see
easily which person you are calling.
8. Repeat these steps for each number that
you save. Replace the clear plastic
Directory cover when you are finished.
PROGRAM