U-Line ICE-MAKER - Manual (Page 30)

8. Remove pivot screw from top hinge, invert screw and reinstall
pivot screw in top hinge (Figure 28).
Figure 28
HINGE
RIGHT SIDE
DOOR SWING
LEFT SIDE
DOOR SWING
RIGHT SIDE
HINGE
INVERT
SCREW
INVERT
HINGE
SCREW
UL115
PLASTIC
PLUG
HOLE
PLASTIC
PLUG
HOLE
28
User’s Manual
9. Remove three plastic screw
plugs in hinge holes, top of
cabinet, opposite side. Be
careful not to scratch cabinet
(Figure 29).
Figure 29
10. Place door on lower hinge pin.
Invert and install upper hinge
on door.
UL114A
11. Fasten upper hinge to unit
(three screws). Partially tight-
en screws until door is aligned
(Figure 30).
Figure 30
UL119
30035 User Manual Body.qxd 1/5/05 8:08 AM Page 28