Uniden BC45XLT - Manual (Page 28)

24
Your BC45XLT is designed to scan 7 programmed NOAA
frequencies, so you easily find your local NOAA weather
broadcast.
Note: It is not advisable to program a weather frequency into
one of the 20 channels since weather channels transmit
continuously. The scanner will remain on the weather
channel, disrupting the scanning cycle.
1. Press to activate the
Weather scan.
Note: If you do not hear the
weather station, press
to deactivate the
squelch.
2. When the Weather Scan finds
an active weather channel, it
stops.
3. Press again to find the
next active weather channel.
Note: In some parts of the country, you may not be able to
monitor weather broadcasts, such as in low-lying
areas. Normally, a higher location or a better
antenna improves reception.
4. To exit Weather scan, press
, , , or .
Weather Scan
BC45XLT 11/2/00 9:04 Page 24