Uniden BC45XLT - Manual (Page 29)

25
General Use
•
Turn the scanner off before replacing the batteries.
• Always write down the programmed frequencies in the event
of memory loss.
•
If memory is lost, simply reprogram each channel.
The display shows 000.0000 in all channels when there has
been a memory loss.
•
Always press each button firmly until you hear the entry tone
for that key entry.
Location
•
Do not use the scanner in high-moisture environments such
as the kitchen or bathroom.
•
Avoid placing the unit in direct sunlight or near heating
elements or vents.
• If the scanner receives strong interference or electrical
noise, move it or its antenna away from the source of the
noise. If possible, a higher elevation, may provide better
reception. Also try changing the height or angle of the
antenna.
Cleaning
• Remove the batteries before cleaning.
•
Clean the outside of the scanner with a mild detergent. To
prevent scratches, do not use abrasive cleaners or solvents.
Be careful not to rub the LCD window.
•
Do not use excessive amounts of water.
Care and Maintenance
BC45XLT 11/2/00 9:04 Page 25