Unitech Hand Held Scanner - Manual (Page 24)

Page 23
7.3.3. Programming Sheet
The bold and italicized characters in following sections mean a barcode
label on the Programming Sheet.
Enter
Group 10 Scan this label to start the formula input.
Group
Default Erase all formulas.
Review To see the formulas programmed in the
Wedge. If scanning this label during a
formula input (without finished by scanning
“Enter”), the current formula will be
displayed. Otherwise, all programmed
formulas will be displayed.
Backspace Delete the last character.
, Delimiter to separate parameters.
" String specifier.
* Wild character to specify any digit or any
position.
# Wild character to specify any letter(A--Z, a--
z) or last position
Enter To end the current formula.
0 to 9 For digit input.
IN_ID For ID field input.
LEN For Length field input.
MATCH For Match field input.
O-STR For O-String input.
+ For O-String input.
- For O-String input.
Exit Save all formulas and exit setup.
Note: The '*', '#', '" ' and ',' on Programming Sheet have special
meanings as mentioned above and are different from those represented
in Full ASCII chart. Always use characters in Full ASCII chart for
string parameters unless a special function is required.
7.3.4. Parameter Entry
a) Digit Parameters and Numbers
Each digit parameter or number is represented by one to three
digits with ‘,’ as terminator. For example:
1,
023,