Unwind DC-PT100 - Manual (Page 11)

10
PLAYABLE DISCS
The following types of discs can be played on this unit.
Region number
Region number (Regional restriction code) is built-in to the unit and DVD
discs.
There is a region number on the bottom of the unit.
The same region number or region number “ALL” of DVD discs can be
used on this unit.
DVD disc
There are the marks on some DVD disc packages.
Example:
Multiple languages Multi-aspect
Multi-language subtitles Region number
Multi-angle Closed caption
DVD discs are divided into titles, and the titles are sub-divided into
chapters.
Video CD/Audio CD disc
Video CD/Audio CD discs are divided into tracks.
Note:
-
Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, SVCD, CVD, etc. cannot be played.
- This unit can play back the Video CD (VCD).
- This unit can play back the DVD-R that has recorded movie data.
However, some DVD-Rs cannot be played back depending on the
recording conditions.
- The DVD-R that has no movie data cannot be played back.
- This unit is to be used exclusively with the PAL (or NTSC) colour
system discs. SECAM system discs cannot be used with this unit.
- For DVD discs: The video output signal format can be selected (“PAL
60” or “NTSC”) when playing back the NTSC discs.
- For MP3/WMA CD, please see Page 15.
- For Picture/JPEG CD, please see Page 16.
Notes on handling discs
- Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
- Discs should be returned to their cases after use.
- Do not apply paper or write anything on the disc surface.
- Handle the disc by its edge. Do not touch the playing surface (glossy
side).
- Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
- Never use chemicals such as record cleaning sprays, antistatic
sprays or fluids, benzene or thinner to clean discs.
DISC PLAY
Important note:
-
This “DISC PLAY” explains the basic instruction of the DVD player
section.
- Some DVD or VCD discs have different functions that may not be
explained in this instruction manual. You may need extra
instructions. In this case, please follow the instructions displayed
on the TV screen or jacket or case of the disc.
- “ ” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Preparations
- Turn on the TV and select the video input for this unit.
Select the playback picture size according to the aspect ratio of the
TV. (See “Setting display” on Page 17.)
- Select the desired language for the on-screen menus. The following
languages can be selected. (See “Setting language” on Page 17.)
English (default), Spanish, French, German, Portuguese
In this instruction manual, the language in on-screen display is
English. If you changed the language, please follow the selected
language in on-screen display.
Note:
-
Do not touch the disc lid while it is moving.
- Never place anything except a disc on the disc compartment. Foreign
objects can damage the unit.
- Only one disc must be placed on the disc compartment at a time.
- To open or close the disc lid, be sure to use the OPEN/CLOSE (or q
on the main unit) button. Do not press the disc lid with your hand.
When operation buttons are pressed, that operation is displayed
on the TV screen for several seconds.
1. Press the OPEN/CLOSE button. “OPEN” appears on the display and
the disc lid opens. “SANYO” logo appears on the TV screen.
-
When using the main unit, use the q button.
2. Hold the disc with the labeled side up and press it onto the disc
turntable until it “clicks” into place (Fig. 13).
3. Press the OPEN/CLOSE button again. The disc lid closes and
“READING” appears on the display.
Note:
Some discs may start play automatically.
Starting play
Press the a (Play) button. The DVD/CD function is selected and play
starts automatically.
Example:
Note:
If “NO DISC” appears on the display, load the disc.
-
If the disc is loaded with the label side downward (and it is a single
sided disc), or if a badly scratched disc is loaded, “NO DISC” (or “NO
PLAY”) appears. If this occurs, load the disc correctly or replace the
disc.
Disc type and logo mark
DVD Video
Audio CD
LB 16:9 3
2
3
2
Title 1
Chapter 1 Chapter 2
Title 2
Chapter 1 Chapter 2 Chapter 3
Track 1 Track 2 Track 3 Track 4 Track 5
Chapter number Elapsed playing time