Nti unimux multi-user kvm switch 9 – UNIMAX Houseware KVM Switch User Manual
Page 14
NTI UNIMUX MULTI-USER KVM SWITCH
9
Figure 7- Connect each CPU using a USBVEXT-xx-MM cable
4. Power-up
• Plug the UNIMUX switch into an AC power outlet.
• Turn ON power to the UNIMUX switch, the LCD should illuminate.
• Turn ON power to any or all CPUs connected to the UNIMUX switch (if they aren't ON already).
Note: The order in which the CPUs and switch are powered up does not matter. A power strip can be used.
Rear View of UNIMUX
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
VIDEO 6
VIDEO 7
VIDEO 8
VIDEO 9
VIDEO 10
VIDEO 11
VIDEO 12
VIDEO 13
VIDEO 14
VIDEO 15
VIDEO 16
USER 1
USER 2
USER 3
USER 4
R
S
2
3
2
CPU 1
CPU 2
CPU 3
CPU 4
CPU 5
CPU 6
CPU 7
CPU 8
CPU 9
CPU 10
CPU 11
CPU 12
CPU 13
CPU 14
CPU 15
CPU 16
NTI
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.nti1.com
R
USB Type A Female
USB Type A Male
USBVEXT-xx-MM
15HD Male
Video Connector
15HD Female
Video Connector
USB Type B
Female Connector
USB Type B
Male
15HD Female
Video Connector
Rear View of Windows USB CPU
Video Port
Input Device Port
CPU 1
VIDEO 1