UNIMAX Houseware KVM Switch - Manual (Page 9)

NTI UNIMUX MULTI-USER KVM SWITCH
4
Additional Features
•
A single CPU can be used by one or shared by several users.
•
Any USB type user device can control any USB CPU (Windows, MAC, and SUN platforms).
•
Power cycle circuit control allows the UNIMUX switch to be powered OFF, then ON, at any time without affecting the attached
CPUs. (This assumes that the CPU supports hot plugging.)
•
Security features can be enabled on a user port by user port basis.
•
A microprocessor is dedicated to each CPU, preventing connected CPUs from locking up.
•
Any user device cable can be hot-plugged.
•
Typically the LCD display indicates the CPU to which each user is connected.
•
10 configurations can be saved in memory by the user for instant setup recall.
•
No dip-switches or jumpers necessary to configure.
•
Video formats up to 1900X1200 can be displayed from all platforms.
•
Users can control the switch using the On Screen Display (OSD)
• RS-232 control allows control of the switch with one CPU serial port. (Windows-based software is provided.)
•
Matrix Switcher's Control Program provides easy and powerful graphical control of matrix switches through the RS-232
interface. (Windows only.)