UNIMAX Houseware KVM Switch - Manual (Page 46)

NTI UNIMUX MULTI-USER KVM SWITCH
41
INDEX
Alternate command hot key, 24
Apple Mouse, 27
autologin, 26
Autostatus, 32
baud rate, 29
Broadcast Mode, 17
cables chart, 39
Cascading, 35
Change password, 23
devices supported, 1
edit user, 22
Find Mode, 15
forgot password, 19
front panel keypad, 10
fuse, 3
hot-plug, 4
idle timeout, 24
Installation, 6
Key Equivalents, 27
keypad, 10
Matrix Switcher's Control Program, 32
mounting in rack, 5
OSD, 11 Password and User Name, 19
port configuration, 21
reset port names, 25
RMTEST, 34
RS232 Command Protocol, 31
RS232 Interface, 29
Scan Mode, 16
security configuration, 26
security enable, 26
Security features, 11
Select Language, 25
SerTest, 33
Settings, 14
Sharing Mode, 17
size range, 2
standards of operation, 11
Sun's extra keys, 27
system configuration, 21
Troubleshoot, 40
USBVEXT-xx-MM cable, 8
user access control, 23
user configuration, 22
user control methods, 10
Please Note: This manual applies to UNIMUX-nXm-U with firmware version 2.1 and later. This version
number can be found in the splash screen viewed when the UNIMUX is first powered ON (example shown on
page 12). If no version is shown, it is an earlier model. UNIMUX-nXm-U with earlier firmware versions are
covered in manuals for the UNIMUX dated prior to August 6, 2008. An earlier manual can be found at
www.networktechinc.com.
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network
Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at
http://www.networktechinc.com
for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
Man028 Rev 8/6/2008