Unisys NX5820 - Manual (Page 108)

VX1305 Servers
6–2 7017 6300–005
VX1305 Servers
Note: This configuration guide lists the basic features and options offered with
VX1305 servers. The VX1305 server supports Windows NT. Your Unisys
representative can provide details on server options available beyond those
documented here.
VX1305 Basic Features
•
One to ten servers (Five maximum per domain)
−
VX1305-BSE (server A: server position 1)
−
VX1305-BSU (server B, C, D, E, F, G, H, I, or J: server positions 2, 3, 4, 5, 6, 7, 8, 9,
or 10)
•
One to two processors per server
•
One memory card per server
−
Initial memory size is 256 MB per server
−
Up to three (3) additional 256 MB memory styles can be installed in the server.
•
PCI/ISA architecture
−
One ISA
−
Six PCI
−
One shared ISA/PCI card slot
•
Dedicated peripheral devices, per server:
−
Two hot-swappable 3.5-inch RAID disks and RAID controller with 4 MB cache
memory. One additional disk is optional.
−
Three drive RAID cage
−
One CD-ROM drive
−
One 1.44 MB 3.5-inch diskette drive
•
Redundant hot-swap power supplies with dual AC inlets
•
Redundant hot-swap cooling fans
•
Connection and user access packages depending on client requirements
Table 6–1 lists the standard features provided with the VX1305-BSE/-BSU packages.
Additional processors, additional memory, connection packages, and user access
components must be ordered separately.
Figure 6–1 provides a road map for ordering VX1305 servers. The remainder of this
subsection describes the server contents.