Unisys NX5820 - Manual (Page 80)

Work Space
3–14 7017 6300–005
Work Space
An optional console table is available for operator work space and/or placement of the
monitor/keyboard/mouse shared by the SCP, the server, and the ST selector.
•
Package style: TAB40-048, Console Table (40 inches by 48 inches by 40 inches high)
Redundant Power for the NX5820 and NX5820 K
•
Component Style: NX5800-RPW (NX5820 and NX5820 K redundant power).
•
One NX5800-RPW is optional per domain and must be ordered separately.
•
Ensures that the power supply remains operational in the event of a single power
supply failure. Redundant cooling is already included within the NX5820 and NX5820
K system.
•
Includes the following components:
Component Description Quantity
ac/dc bulk power supply 1
5 volts dc/dc power supply 1
3.3 volts dc/dc power supply 1
See Section 2 (NX5820 Power Layout and Requirement) for redundant power supply
layout.
Configuring Additional OSS7000 Devices
Each system comes with a standard OSS7000 subsystem that contains two disks, one CD-
ROM, and one QIC tape. This can be expanded as follows:
•
Two additional 4-GB disks (Style OSD4111-S20) may be ordered for a maximum of
four disks.
•
One additional CD-ROM (Style OSD6201-RCD) or QIC tape (Style OSD1001-QTA) may
be ordered for a maximum of three devices allowed (two being in the basic system).
Converting From NX5820 to NX5820 K Systems
Table 3–6 lists the package styles that are used when converting single and dual domain
NX5820 systems to NX5820 K systems. It also lists the component styles and quantity
used in each package style. See ClearPath Enterprise Server NX5800 Upgrades/NX5820
Migration Installation Guide
, 7016 7143 for conversion instructions.