Alarm, Quick setting – UTStarcom CDM-105 User Manual
Page 56
Section 2H: Using the Phone’s Calendar and Tools
97
Quick Setting
To quickly set the alarm:
1.
Press Menu (
) to access the main menu.
2.
Select Tools (
).
3.
Select Alarm (
).
4.
Press Quick Setting (
).
5.
The Quick Setting Screen will appear and the setting
will default to Off. Press your navigation key to select
the amount of time until the alarm will ring.
6.
Press Select (
) to set the alarm. To cancel quick
setting, select “Off” or press Cancel (
) on the
Quick Setting screen. Press Yes (
) to cancel the
alarm.
Calendar & T
ools
96
Section 2H: Using the Phone’s Calendar and Tools
Alarm
To set an alarm:
1.
Press Menu (
) to access the main menu.
2.
Select Tools (
).
3.
Select Alarm (
).
4.
To set a new alarm, choose Empty and press Select
(
). Edit the date and time by pressing the digit
keys. Press your navigation key to edit the other fields.
5.
Press your navigation key to change the value in each
field. Press Save (
) to save the alarm.
6.
To edit an existing alarm, press Edit (
). Follow
instructions for setting up a new alarm. To delete the
alarm, press Del (
).
Note:
The phone displays the date and time based on the information from the
digital CDMA network. Therefore, the date and time will not be displayed
while the phone is out of the service area or operates in the analog mode after
the phone is turned on. The clock and schedule alarms will not work if the date
and time are not displayed.
Tip:
While the alarm is ringing, if Snooze (
) is pressed the alarm will
sound again after 10 minutes.