UTStarcom CDM8945 - Manual (Page 23)

C
H
4
C
H
4
44
CONTACTS CONTACTS
45
In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number and then press and hold the
second number.
SPEED DIALS
1
2 To assign a phone number to a location, select
the location and then press [SET].
3 Select the contact with the Navigation Key and
then press . To confirm, press .
4 “Speed dial set” will be displayed.
• “Unassigned” appears if the location is available.
• To call an assigned number, press & hold the last digit of the
speed dial #.
ERASE GROUP
2 Select an existing group name with the
Navigation Key.
3 To select “Erase”, press [OPTIONS].
4 Select “Yes” to erase it, press .
1 Press [MENU], press “Groups”.
SEND PIX/FLIX MSG. GROUP
1 Press [MENU], press “Groups”.
2 Select an existing group name with the
Navigation Key.
4 Input a “Text”, “PIX or FLIX”, “Sound”, “Subject”,
and then press [OPTIONS] to select
“Preview”, “Add Quick Text”, “Save As Draft”,
“Priority Level”, “Remove Picture”, “Remove
Sound”, “Add Slide”.
5
3 To select “Send PIX/FLIX Msg”,
press [OPTIONS].
5.1. To send the PIX message, press [SEND].
5.2. To save the PIX message, press [OPTIONS]
and then select “Save As Draft” and then
press .
Press [MENU], press “Speed Dials”.