Settings – UTStarcom CDM8945 User Manual
Page 27
C
H
4
53
C
H
4
52
SETTINGS
52
SETTINGS
To select a ringer type for incoming calls:
CALL SOUNDS
2
Select your desired ringer type.
3
Select one of the available ring types.
To confirm, press .
1
Press [MENU] and then select “Settings &
Tools” menu, press “Sounds” and then select
“Call Sounds”, press “Call Ringtone”.
Up or Down key : Select “Ringer”.
Press Play/Pause to the ringer.
CALL RINGTONE
2
Select “On” or “Off” with the Navigation Key and
then press to save it.
1
Press [MENU] and then select “Settings &
Tools” menu, press “Sounds” and then select
“Call Sounds”, press “Call Vibrate”.
CALL VIBRATE
When selected, this setting alerts you to the following handset changes:
ALERT SOUNDS
1
Press [MENU] and then select “Settings &
Tools” menu, press “Sounds” and then select
“Alert Sounds”, press “TXT Message”.
TXT MESSAGE
2
Select “Tone”, “Vibrate” or “Reminder” with the
Navigation Key and then select one of the
following options by pressing the Navigation Key.
Tone : 1. Get New or select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3
To save, press .
1
Press [MENU] and then select “Settings &
Tools” menu, press “Sounds” and then select
“Alert Sounds”, press “PIX Message”.
PIX MESSAGE
2
Select “Tone”, “Vibrate” or “Reminder” with the
Navigation Key and then select one of the
following options by pressing the Navigation Key.
Tone : 1. Get New or select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3
To save, press .