UTStarcom CDM8945 - Manual (Page 37)

C
H
4
73
SETTINGS
C
H
4
72
SETTINGS
1 Press [MENU] and then select “Settings &
Tools” menu, press “Call Settings” and then
select “Auto Retry”.
Automatically redials a call up to 5 times after a set time interval.
2
3
Retry time field is shown. Press the Navigation
Key left or right to choose the amount of time.
(Off, 3 Seconds, 5 Seconds, 7 Seconds or
10 Seconds)
When a time is chosen for retry time, the repeat
field is shown. Press the Navigation Key down to
highlight the repeat field. Press the Navigation
Key left or right to choose the number of
repeats. (1 Time, 3 Times or 5 Times).
4 To save, press .
AUTO RETRY
1 Press [MENU] and then select “Settings &
Tools” menu, press “Call Settings” and then
select “TTY Mode”.
Your phone is able to operate with a TTY (Teletypewriter) device in
both analog and digital modes. This feature is system dependent and
may not be available in all areas.
3 To save, press .
TTY MODE
2 Select one of the following with the Navigation Key.
TTY Off
TTY+ TALK
TTY + HEAR
TTY Full
l
l
l
l
Enhances voice privacy and avoids tapping during a call.
On : Makes it more difficult to wire tap. l
1 Press [MENU] and then select “Settings &
Tools” menu, press “Call Settings” and then
select “One Touch Dial”.
ONE TOUCH DIAL
2 Select “On” or “Off” with the Navigation Key and
then press to save it.
1 Press [MENU] and then select “Settings &
Tools” menu, press “Call Settings” and then
select “Voice Privacy”.
VOICE PRIVACY
2 Select “On” or “Off” with the Navigation Key and
then press to save it.
1 Press [MENU] and then select “Settings &
Tools” menu, press “Call Settings” and then
select “Data Setting”.
Choose the connection mode for the usage of your phone.
3 To save, press .
DATA SETTING
2 Select one of the following connection modes
with the Navigation Key.
Voice Call : To receive a voice call.
Data Only : To receive data when connected to PC. l
l