Uniden EXa15580 - Manual (Page 31)

SETTING UP
YOUR
ANSWERING SYSTEM
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 31 ] www.uniden.com
• Normally, the system
will return to standby
if it remains idle for
10 seconds after the
volume/select/
or
key is pressed. For
setting the time,
however, the idle time
is extended to two
minutes.
• Press and hold the
volume/select/ or
key to quickly
scroll through the
numbers on the
display.
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/clock
key.
The system announces "Time" followed by the current
time and the instructions for setting the time.
2) Press the volume/select/ or key until the correct
day is announced. The numbers [ ] through [ ] are
displayed on the base.
3) Press the set key to select the day.
4) Press the volume/select/ or key until you hear
the correct hour setting. The numbers [ ] through
[ ] are displayed on the base.
5) Press the set key to select the hour.
6) Press the volume/select/ or key until you hear
the correct minute setting. The numbers [ ] through
[ ] are displayed on the base as each minute is
announced.