Uniden EXa15580 User Manual
Page 32
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
[ 32 ]
www.uniden.com
7) Press the set key to select the minute.
8) Press the volume/select/
or
key until you hear the correct AM or PM set-
ting. The message counter displays [
] or [
].
9) Press the set key to select the AM/PM setting.
You hear a confirmation tone followed by the announcement "Time," and the day and
time are then announced for your review. After a few seconds, the system announces
“To set security code, press menu again.”
Setting a Personal Security Code (PIN)
If you want to be able to play your messages from a remote location, you need to
enter a two-digit Personal Identification Number (PIN) code (01-99). To select a
PIN, perform the following steps:
1) With the phone in standby mode, press the menu/clock key twice.
The system announces “Security code,” and the current PIN code is announced as
it is displayed on the base. Then the system announces the instructions for
setting the PIN code.
2) Press the volume/select/
or
key until the desired number appears.
3) Press the set key to select the PIN code. You hear a confirmation tone, then the
announcement “Security code” followed by the new PIN code is announced. After a
few seconds, the system announces “To set ring time, press menu again.”
The PIN code is set to
"80" at the factory.