Uniden EXa15580 User Manual
Page 33
SETTING UP
YOUR
ANSWERING SYSTEM
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
[ 33 ]
www.uniden.com
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before
your answering system plays the outgoing message. You can set the ring time to
answer after two, four, or six rings. If you select Toll Saver [
], the answering
system picks up after two rings if you have new messages, and after four rings if
there are none. This way, if you make a long distance call to check your messages,
you can hang up after the second ring to avoid billing charges.
1) With the phone in standby mode, press the menu/clock key three times.
You hear “Ring time” and the current ring time ([
], [
], [
], [
] Toll
saver), and it is displayed on the base. Then you hear the guidance for setting the
ring time.
2) Press the volume/select/
or
key until the desired ring time appears.
3) Press the set key to select the new ring time. You hear a confirmation tone, then
the announcement “Ring time” followed by the new ring time. After a few
seconds, the system announces “To set record time, press menu again.”