Attach and remove belt clip, E-8 battery level icon battery level icon, As long as you press – Uniden 200 User Manual

Page 12

Advertising
background image

E-8

Battery

Level

Icon

Battery Level

Icon

LEVEL 5
100% Full

HIGH

US

LEVEL 4
Battery
Approx.70%
Capacity

HIGH

US

LEVEL 3
Battery
Approx.50%
Capacity

HIGH

US

LEVEL 2
Battery
Approx.20%
Capacity

HIGH

US

LEVEL 1
Low Battery
(10% or Less)

HIGH

US

LEVEL 0
Nearly Empty
(Flashing)

HIGH

US

CAUTION

• You can’t transmit if the Battery Indicator shows Level 0

when you press

PTT

.

• As long as you press

PTT

, an error

tone sounds and TX and CH blink.

• It is possible to receive at Level 0, .

Attach and Remove Belt Clip

To attach

:

1. Position belt clip above its

receptacle on the upper back
side of the radio.

2. Slide the belt clip down into its

receptacle until you hear it click.
The belt clip is firmly attached.

To remove:

1. Pull up on the locking tab.
2. Slide the belt clip up and out of

its receptacle.


A

US

HIGH

LO

TX

Advertising